TEPCO Unable To Find Water Level Inside Unit 1

The initial inspection today of unit 1 containment was unable to find the water level inside containment according to 47 News. More will likely be known after the additional inspections are done this week on unit 1.

The rough machine translation of the article, below.

09, TEPCO he announced in a reactor containment vessel of Unit 1 Fukushima Daiichi, start a study with a small camera, and was confirmed by the video for the first time on the water seems to be contaminated water at the bottom. Water level is unknown, measured 10 days. The 12th plan to collect the contaminated water.

　Piping from the walls of the Unit 1 containment vessel, a survey of 09, it was confirmed internal hanging a camera field of view can be adjusted up, down, left, or right.

　Inside the entrance of the equipment in the wall of the containment vessel, major damage was not found. A scaffold for the inspection work in the entrance is like a bolt had fallen.

　The survey collected contaminated water, analyzing the concentration of radioactive material. I want to know which fuel is damaged or degree. Continue until 13, so you can also set up a sensor constantly monitors the temperature and water temperature, the water level in the container.

This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org

© 2011-2023 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than http://www.simplyinfo.org (or http://www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.