Asahi Shimbun mentions in one of their reports on the pond tank leakage at Fukushima Daiichi that the HDPE plastic sheet being used on the ponds as lining material is 1.5mil plastic.
“The underground storage tank–60 meters long, 53 meters wide and 6 meters deep–is lined with an outer 6.4 millimeter-thick layer of clay, and topped by two layers of polyethylene sheets, each 1.5 millimeters thick.”
This would be a total of 3 mil plastic. Other reports mentioned there might be 3 layers of plastic sheet used, that would only make it 4.5 mil thick.
For some contrast trash bags used to line trash cans are frequently 1.5 mil or thicker.
Liner used for koi ponds or commercial lakes is 20 mil thick.
So the question is who thought this was appropriate and who approved this design using was equaled trash bag plastic. This is clearly sub standard by any measure and as we documented in previous reports over recent days this design used would not meet any standard for even sewage ponds. Now it seems clear this design isn’t even up to the standards of a back yard garden pond.
Maeda Corporation who did the pond work, was found by Asahi Shimbun to have put in an outrageously low bid for the decontamination work they did that was later found to have been not done properly as they dumped materials in ditches and streams or otherwise cut corners.
Previous story on Maeda’s work at Daiichi and shoddy decontamination work http://www.simplyinfo.org/?p=10154
Background information on proper industrial pond construction http://www.simplyinfo.org/?p=10152
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2022 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than http://www.simplyinfo.org (or http://www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.