According to a document TEPCO released this week, as long as third party inspections are passed Thursday and Friday work to removal fuel may start on Monday.
A dry run of cask handling was done on November 13th along with a mock fuel removal using “simulated fuel”. TEPCO has outlined a bit more about processes and safety mechanisms put in place. TEPCO did have training time blocked off in the schedule, so some sort of unified training for the work teams will take place.
TEPCO outlined these safety prevention tactics (machine translation)
Of fuel handling machine | fuel fall Failure or incorrect operation
Hoist the structure that holds the electromagnetic brake to power failure
And fuel gripping machine structure the hook is not open to the air source upon loss
And mechanical interlock of fuel gripping machine
And fuel gripping machine structure to hold the wire rope double
Check the hold state of the fuel in water camera
The erroneous operation, failure of the crane | cask drop
The structure and equipment to be held in the electro-hydraulic brake push-up machine to power failure hoisting
Duplex wire rope, brake, of hangers
The hook structure having a device to stop off
Crane work before the start of pre-inspection of equipment as suspension
And confirmation of the attachment status before lifting
Adding to the complexity of the fuel removal is some damaged assemblies found in the pool. TEPCO says these are from before the disaster but one is bent at a 90 degree angle. TEPCO will have to adopt special procedures to get those assemblies out of the pool.
A machine translation of the Japanese TEPCO document can be found here.
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2022 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than http://www.simplyinfo.org (or http://www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.