TEPCO has progressed on removing debris from the unit 3 spent fuel pool. The current work is to dismantle the fuel handling crane piece by piece and remove it from the pool. The trolley, main hoist and roof trussing that was above the crane have already been removed. Once the last of the fuel handling crane is removed work will begin to remove debris from the cask handling area of the pool. Cask area debris removal is expected to take til July of this year. There is not a plan outlined for how they will remove the remaining debris down among the fuel racks or how long that will take.
Removal of part of the fuel handling machine. One crane holds while the other shears off the piece.
Removal of the fuel crane is critical to determining the damage to the spent fuel and towards finally covering unit 3 with a protective cover.
Work is ongoing to install a reactor well wall on top of unit 3. High radiation levels coming from the reactor well have required shielding to be installed to deal with this problem.
5/29 (Thursday)-6/25 (Wednesday) main work plan
SFP in debris removal
-R／B top decontamination (debris accumulation, debris suction, floor surface cutting)
Working yard maintenance
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2023 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than http://www.simplyinfo.org (or http://www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.